WC700 Plus: Advance wear-fighting properties...
'Wear
Plate' and 'Wear-Con' are almost synonymous with each other. Often, when someone thinks of wear plate
or overlay plate, they think of us. Wear-Concepts
has been fighting wear for over two decades. In fact, the combined experience of
the Wear-Con staff in the steel and cement industries covers numerous decades. Our
rich heritage in the industry is just one of the reasons our staff not only
understands wear, but understands what's needed to fight wear. And most
importantly, they know that there is no such thing as 'one solution fits all'.
A sure sign of a Wear Specialist.
All Chrome Carbide is not made the same? View Plate List >
Wear-Con's WC700 Plus Chrome Carbide is a unique chromium
carbide overlay on a mild steel base plate. The unique characteristic of this
plate over our competitors plate though, is that it has 2% more chrome carbide.
It is designed for areas with severe impact and abrasion. WC700 Plus can be
formed, rolled and cut to your specific needs. The 'Plus' denotes the extra
chrome carbide content, which results in longer wear.
Mechanical Properties
Hardness:
60 - 64 Rockwell C
Max Service Temp 1000 degrees F
Overlay is applied to the width of the plate
Chemical Properties
Element Percent
C
4.0-5.0
Mn
0.3%
P
0.02
Si
1.1%
Cr
28-32%
WC700 Plus can be welded with a low hydrogen rod such as AWS spec. 7018 on the base metal. The cover pass at the overlay section should be 60 RC Hard surface Rod (e.g. Wear-Con VP100).
Suggested Uses
Cement: Primary Crusher Liners, Secondary Crusher
Liners Skirtboard Liners, Raw Material Chutes & Hoppers, Separator Blades,
Separator Liners, Separator Table Liners, Separator Cones, Clinker Chute Liners,
Fan Housing Liners, Fan Blades, Front-End Loader Wear Pads, Drag Line Bucket
Teeth and Wear Pads.
Power: Coal Handling Chute Liners, Coal Crusher Liners, Skirtboard Liners, Exhauster Fan Blades, Exhauster Spider Wear Pads, Pulverizer Classifier Cones, Pyrite Liners, Ash Hopper Liners, I.D. Fan Housing Liners, I.D. Fan Blades.
Grain: Dozer Wear Pads, Drag Conveyor Liners, Cyclone Liners, Dryer Plate, Prater DF Series Liners, Champion Series Liners, Chute Liners
Sand & Gravel: Skirtboard Liners, Chute Liners, Front-End Loader Wear Pads
Glass & Fiberglass Industry: Cullet
Chutes & Hoppers, Fan Housing Liners, Fan Blades
Just a sample of various parts Wear-Con has made. For links to
other solutions we have provided go to
www.wearcon.com.
1-888-4WEARCON
Content: © Copyright 2016 Wear-Concepts, Inc All Rights Reserved.